What do the numbers on my recurve bow mean?
The numbers on your limb indicate the draw weight at two different riser lengths (25 and 23 inches). The number in the middle indicates the total bow length (between 70 and 50 inches). Most adults use a 25-inch riser and should look at the upper two numbers to find the bow length and draw weight.
How long should a recurve bow be for 66?
Now, don’t forget to get one 3” shorter. A 66-inch recurve bow would get a 63” string, for example.
How long should a 66 inch bow string be?
This 66″ Bow String will suit any recurve bow measuring 66″ AMO length. The Strings actual length is 62″.
What is draw length on a 60 inch recurve bow?
For example, a bow that’s 60 inches long will have peak performance at a draw length of 24 inches.
How do I know my recurve bow draw weight?
› Choose-a-Draw-Weight-for-…
What is the best draw weight for a recurve bow?
Choose a recurve bow which has a draw weight of 40 pounds minimum. Now, you can hunt perfectly well for smaller game like turkey and rabbit with a 35 or even 30 lbs. bow, but for anything larger than that (deer, elk) you’ll need 40 lbs. or more.
What size bow should I get for my height?
› what-size-recurve-bow-do-i-need
How far can a 25 pound recurve bow shoot?
What Can You Do With 25# to 30# Recurve? Contrary to what most people think, a 30 or even a 25 lbs. draw weight is more than enough for recreational target practice. If you have the aim for it and your form is on point, you can successfully hit a target from 60 or even 70 yards away with this kind of draw weight.
How is recurve bow length measured?
ANSWER: The easiest way to measure the length of your traditional bow is to start at the string groove, follow the curvature of the limb along the belly side of the bow, across the riser area, and follow the curvature of the other limb to the other string groove. This will give you the a.m.o. bow length.
How long should recurve string be?
For a recurve bow your string length should be about 3.5″ shorter than your bow length. Hence, if you are using a 68″ bow, your string length should be about 64.5″.
What is the best string for a recurve bow?
Most recurve archers use DynaFLIGHT 97, BCY 8125, or BCY-X – basically a durable string with very few fibers for increased arrow speed.
How do I know what bow string I need?
Measure its length from string groove to string groove. Once you know the bow’s length, you can determine your bowstring’s length. If you shoot a recurve, your bowstring is usually 4 inches shorter than the bow’s length. If you shoot a longbow, the bowstring is 3 inches shorter.
Does draw length matter recurve bows?
Unlike a compound, recurves and longbows don’t have set draw lengths. However, the bow-tech must still find your draw length because the bow’s length must match your draw length. If you have a long draw length, you’ll need a longer bow to better accommodate your draw length and feel comfortable.
How do I know if my draw length is too long?
The ideal draw length for you is the one that allows you to anchor in a comfortable position, with your bow arm elbow unlocked (slightly bent) and your release arm elbow and forearm pointing straight away from the target. If the release arm elbow points left or right, your draw length is too long or too short.
What do the numbers on Excalibur limbs mean?
higher numbers do not necessarily mean faster limbs. Since they changed the rating system a year or so ago only Excalibur knows which limbs are faster. As stated the numbers need to match or be very close = they are only for grouping matched limbs!!!
What do bow specs mean?
The higher the number, the faster the bow. A bow rated at 300 fps is faster than a bow rated at 290 fps. Bow companies list “ATA” or “IBO” next to their speed ratings.
How are bow limbs measured?
The bow length is the measurement from the tip of the top limb to the tip of the bottom limb of an unstrung bow with the tape measure following the limbs. Depending on which riser length you use 23″ or 25″ you can tailor your bow to fit you.
How are compound bows measured?
A compound bow’s length is measured from axle to axle, which is where the bow’s limbs connect to the cams. Axle to axle is often abbreviated as ATA. For example, a 35-inch ATA bow measures 35 inches from axle to axle.