What are the holes in my recurve bow for?
Recurve bows usually come pre-drilled with a hole in the riser for the plunger button. If the riser comes with two holes always use the rear hole for the plunger button (the hole directly above the bows pivot point).
What is a plunger hole in a bow?
More videos on YouTube
A plunger is a small cylinder that threads into your bow’s riser above the arrow rest. A plunger houses a spring, and the plunger’s tip contacts your arrow shaft. Plungers have two main functions: They set the center shot, and absorb imperfections as the arrow takes flight.
What is a Berger hole on a bow?
The Berger Hole is the tapped hole above the arrow shelf on a compound bow. The arrow rest is screwed into the berger hole from the outside of the riser. It is standard to have your arrow centered on the center of the berger hole when setting up the bow.
Is it OK to leave the string on a recurve bow?
You can leave the bow strung all day if you want. Keep in mind that every time you string or unstring your bow, you’re taking a little risk. It’s like accidents.
What are the holes in my recurve bow for?
Recurve bows usually come pre-drilled with a hole in the riser for the plunger button. If the riser comes with two holes always use the rear hole for the plunger button (the hole directly above the bows pivot point).
What is a Berger hole on a bow?
The Berger Hole is the tapped hole above the arrow shelf on a compound bow. The arrow rest is screwed into the berger hole from the outside of the riser. It is standard to have your arrow centered on the center of the berger hole when setting up the bow.
Do I need a sight on my recurve bow?
The sight is one of the most important components of a modern recurve bow. Without a sight you will have to aim either with the arrow or instinctively. Both options are quite difficult to learn which makes shooting really accurate very difficult.
Do I need a plunger for my recurve bow?
Nearly every competitive recurve archer will need a plunger after completing introductory lessons. The right plunger increases consistency and can last years, maybe even decades. It helps make your bow more forgiving, but don’t ask it to fix every shooting problem.
What is a clicker on a recurve bow?
A clicker, or draw check, makes an audible noise (click) when an archer hits his desired draw length. They are used by almost all Olympic archery shooters to achieve the precision accuracy needed to succeed in that field. They work great as a signal, or trigger, to release the arrow.
What does a pressure button do on a recurve bow?
What does the button do? In simple terms, the pressure button helps to centre the arrow, then stabilises the arrow’s flight as it leaves the bow. If tuned correctly, it can help to give you a more forgiving shot.
What is a bow shelf?
Shelf — Radiused ledge of a bow’s sight window where the arrow rests. Sight Window — The area on a recurve or longbow handle that has been cut out to allow the arrow to come closer to the centerline of the bow (to help eliminate the occurrence of archer’s paradox, see above).
What is a Berger button?
What is the Berger Button? Also known as the plunger Button, the Berger Button is an accessory that is an integral part of the bow. It is composed of an internal spring. It is positioned on the bow riser and the arrow shaft. Its main function is to dampen the arrow when it is propelled.
What do you call the string on a bow and arrow?
A bowstring joins the two ends of the bow stave and launches the arrow.
How long can you keep a recurve bow strung?
The best practice is to unstring your wooden recurve bow or longbow after you’re finished shooting. Modern recurve and longbows made from synthetic materials can be left strung for up to 3 weeks, but should be unstrung for long-term storage. Compound bows can be left strung indefinitely.
How long will a recurve bow last?
A well made recurve bow can last a long time, there are recurve bows that still shoot and remain in good condition after five decades of use. If you take good care of a recurve bow it can last 20 years or more with proper storage and maintenance.
Can you dry fire a recurve bow?
Dry firing a crossbow, compound bow, or recurve bow could cause a literal explosion! Plastic or wood parts flying through the air, metal pieces becoming shrapnel, and a tightly coiled string lashing back at your face—these are real possibilities as a result of a dry fired bow.
How do I choose a stabilizer for my recurve bow?
The higher your draw weight (and draw length), the more stabilisation the bow requires, and at a certain point putting more weight on the long rod would make the whole system too front heavy. So as you progress up in draw weight it’s natural to add some counterbalance to the system.