How do I know what size recurve bow I need?
You want a bow that is at least twice as long as your draw length. If your draw length is 28″, you want a recurve that’s 56″ or more. The longer the bow, the more accurate it generally is.
What size recurve bow do I need for my height?
› find-recurve-bow-size
How long should my bow be for my height?
A longbow should fit to your height plus a couple of inches as a rough guide. If you shoot one that is too short, you will find the bow won’t feel smooth to draw. Too long and there is a waste of energy with the extra height of the limbs at full draw.
How do I know what size recurve bow I need?
You want a bow that is at least twice as long as your draw length. If your draw length is 28″, you want a recurve that’s 56″ or more. The longer the bow, the more accurate it generally is.
What size recurve bow do I need for my height?
› find-recurve-bow-size
Can you hunt with a 35 lb recurve bow?
A 35lb recurve will blow right through a whitetail good enough for a kill.It might not be a complete pass through but the arrow will poke out the other side. A deer isn’t that hard to penetrate.
What is a good beginner recurve bow?
Topoint Archery Endeavor
Rated as a best beginner recurve bow, this recurve is a very popular choice for new archers. ILF Pocket Fitting Makes It Easy To Put Together Or Take Apart Riser And Limbs. Change Out Limbs To Decrease Or Increase Weight.
What draw weight do Olympic archers use?
Bow: In Olympic archery, competitors use recurve bows that draw an average of around 48.5 pounds for the men and 33 pounds for the women. The bow may have a mechanical sight, but no optical enhancements. It also may feature stabilizers on the bow.
How do I match my arrows to my recurve bow?
When choosing arrows for a recurve bow, the weight is related to the poundage of your bow. Lighter bows tend to work best with lighter arrows, and heavier bows work best with heavier arrows.
What size string do I need for a 60 inch recurve bow?
ATA Specs say that a bow should be properly braced with a string that measures 3″ shorter than the bow. So if a bow is 60″ is should be braced properly with a string measuring 57″ under 100 lbs of tension after 20 seconds.
Do you twist a recurve bow string?
When re-twisting to achieve correct brace height, be sure to twist in the direction that tightens the center serving. You can determine this immediately on an un-tensioned string simply by grasping each end of the served area between thumb and forefinger, and twisting.
How many strands should a recurve bow string have?
Strand Count
What we consider normal on a high end recurve string in BCY is anything from 14 to 18 strands but when compared to 8190 that 18 strand string would be the equivalent of 24 strands.
What size bow should I get?
The old rule was if you had a short draw length, less than 28 inches, you should shoot a 56 or 58-inch bow. For 28 to 29½-inch draw lengths, a 60-inch bow would perform best. For draw lengths over 29½ inches, a 62-inch bow would be the best choice. I’ve found 60 inches to be a happy medium.
What size draw length do I need for a bow?
To determine your proper draw length, stand upright, spread your arms out to the side and have someone measure your wingspan between the fingertips of your middle fingers. Then, divide that measurement by 2.5. In archery, consistency is the key to accuracy.
What draw weight should I get for a recurve bow?
The survey found that the average draw weight for a male recurve archer is 49.5lb and 40.7lb for women (measured on the fingers at full draw). Among the men, draw weight ranged from 44.5-54lb and 35-45lb amongst the women.
How do I match my arrows to my recurve bow?
When choosing arrows for a recurve bow, the weight is related to the poundage of your bow. Lighter bows tend to work best with lighter arrows, and heavier bows work best with heavier arrows.