How long should a string be for a 62 inch recurve bow?
It should be noted in the description that 62″ is not the actual length of the bowstring. It is 58″, intended for a 62″ bow.
What size string do I need for a 60 inch recurve bow?
ATA Specs say that a bow should be properly braced with a string that measures 3″ shorter than the bow. So if a bow is 60″ is should be braced properly with a string measuring 57″ under 100 lbs of tension after 20 seconds.
What length string do I need for a 58 inch recurve bow?
This 58″ Bow String will suit any recurve bow measuring 58″ AMO length. The Strings actual length is 54″.
What size string do I need for a 60 inch recurve bow?
ATA Specs say that a bow should be properly braced with a string that measures 3″ shorter than the bow. So if a bow is 60″ is should be braced properly with a string measuring 57″ under 100 lbs of tension after 20 seconds.
What is the best string for a recurve bow?
Most recurve archers use DynaFLIGHT 97, BCY 8125, or BCY-X – basically a durable string with very few fibers for increased arrow speed.
What length recurve bow do I need?
#4: How Long Should The Recurve Be? You want a bow that is at least twice as long as your draw length. If your draw length is 28″, you want a recurve that’s 56″ or more. The longer the bow, the more accurate it generally is.
How far can a 25 pound recurve bow shoot?
What Can You Do With 25# to 30# Recurve? Contrary to what most people think, a 30 or even a 25 lbs. draw weight is more than enough for recreational target practice. If you have the aim for it and your form is on point, you can successfully hit a target from 60 or even 70 yards away with this kind of draw weight.
Do you twist a recurve bow string?
When re-twisting to achieve correct brace height, be sure to twist in the direction that tightens the center serving. You can determine this immediately on an un-tensioned string simply by grasping each end of the served area between thumb and forefinger, and twisting.
What size bow should I get for my height?
› what-size-recurve-bow-do-i-need
How many strands should a recurve bow string have?
Strand Count
What we consider normal on a high end recurve string in BCY is anything from 14 to 18 strands but when compared to 8190 that 18 strand string would be the equivalent of 24 strands.
When should I replace my recurve bow string?
A Recurve bowstring should be replaced every 2-3 years under normal use. The string should be replaced sooner if it becomes frayed, worn, or otherwise damaged. Modern synthetic materials are very durable but stretch and wear out over time.
What does Amo mean on a recurve bow?
AMO stands for Archery Manufacturers Organisation. This is the method where a measurement is taken between the groove of the nock and the front end of the shaft.
How do I measure my draw length?
First, find a measuring tape and someone to help you. Next, stand up straight and spread your arms out wide. Hold that position while your helper takes a measurement of your wingspan between the fingertips of your middle fingers. Finally, take that measurement and divide by 2.5 to determine your proper draw length.
What size string do I need for a 62 inch bow?
To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string). The actual length of your bowstring (depending on the material) will be 3.5”-5” shorter than its marked AMO length.
What is brace height on a recurve bow?
By brace height we simply mean the distance between the deepest part of the bow riser, and the string in its loose position. The vast majority of recurve bows have a brace height somewhere between 7.5 and 9.75 inches.
What size string do I need for a 62 inch bow?
To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string). The actual length of your bowstring (depending on the material) will be 3.5”-5” shorter than its marked AMO length.
Are all compound bow strings the same length?
String length: The compound bow’s main string connects the cams. It’s a specific length, and you’ll find it in your owner’s manual or on one of the bow limbs. If you can’t find the info, call the manufacturer, visit its website, or ask a bow tech to look it up.
What does AMO string length mean?
So what is AMO length? AMO length is a standard measurement of bow length that is designated to be three inches longer than the bowstring. It usually applies to Recurve Bows and other “conventional bows”.
How many strands should my bow string have?
The most commonly used number of strands is 12 strand B50 string , which provides a balance between size, weight, strength, and nock fit. Bigger 14 strand B50 strings are mostly used on heavier bows as well as where the extra weight of the bowstring acts as a slight damper to make shooting more consistent.