How long should my arrows be for a recurve bow?
What Arrow Length To Get? Once you’ve determined your draw length, simply add 1 to 2 inches to that, and this will be your ideal arrow length. So if your draw length is 28″, you should be using arrows that are between 29 and 30 inches long.
How do I know what length arrows I need?
The standard way to measure arrow length is from the back of the point to the throat of the nock. Your draw length and arrow spine will influence your arrow length. If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches.
What arrows should I shoot with a recurve bow?
Carbon arrows are probably the all around best choice for most recurve bows, whether it be for practice target shooting, competitions and even hunting. Carbon arrows tend to be accurate, durable and are more safe than cheaper alternatives like fiberglass arrows.
What spine arrow for 50 lb recurve bow?
Gold Tip’s spine chart recommends an arrow with a 500-spine rating, assuming the arrow carries a 100-grain point. Take that same 50-pound bow, but increase the arrow length to 30 inches, and the chart calls for a 400 spine.
How long should my arrows be for a recurve bow?
What Arrow Length To Get? Once you’ve determined your draw length, simply add 1 to 2 inches to that, and this will be your ideal arrow length. So if your draw length is 28″, you should be using arrows that are between 29 and 30 inches long.
How do I know what length arrows I need?
The standard way to measure arrow length is from the back of the point to the throat of the nock. Your draw length and arrow spine will influence your arrow length. If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches.
What happens if arrows are too long?
Arrow shaft length also must be matched to your bow. Drawing an arrow that’s too short is dangerous because it may slip off the bow, while an arrow that is too long weakens the spine of the arrow.
How long should your arrows be compared to your draw length?
So on most setups, it’s perfectly acceptable to use an arrow that is slightly shorter than the bow’s adjusted draw length. As long as the arrow sits comfortably beyond the arrow rest (we like to see 1″ minimum overhang), then the arrow length is sufficient.
Are shorter arrows more accurate?
Arrow Length and Safety
So you know that the shorter and stiffer the arrow the better for speed and accuracy, the tradeoff against this is safety.
How do I know my bow draw length?
First, find a measuring tape and someone to help you. Next, stand up straight and spread your arms out wide. Hold that position while your helper takes a measurement of your wingspan between the fingertips of your middle fingers. Finally, take that measurement and divide by 2.5 to determine your proper draw length.
What size arrow should I shoot?
A rule of thumb is that one should add one inch to the draw length. For example yours is 28″ (which is standard, by the way), then choose one that is 29″ long. An arrow that is too short might hit your own hand while shooting, so keep that in mind!
What spine arrows for 30 lb recurve?
800 SPINE WORK BEST WITH A RECURVE OR LONGBOW BETWEEN 30 AND 40 LBS OF DRAW WEIGHT. 30” ARROWS IN . 600 SPINE WORK BEST WITH A RECURVE / LONGBOW BETWEEN 40 AND 50 LBS OF DRAW WEIGHT.
How heavy should my recurve arrows be?
Traditional archery hunting arrows should weigh between 375-1000 grains depending on the bow draw weight and arrow length. The bow draw weight will always be countered by the weight of the arrow. Example: A 40-pound bow draw weight should use a 500 gr arrow.
How long should arrows be for a 30 inch draw?
That could become especially critical when shooting fixed-blade broadheads, which tend to magnify tuning issues. The Easton spine chart recommends a spine of 250 for a 30-inch arrow shot from a bow set at 70 pounds. Cut that arrow length down to 28 inches, and the spine chart recommends a 340 spine.
What spine arrows for 30 lb recurve?
800 SPINE WORK BEST WITH A RECURVE OR LONGBOW BETWEEN 30 AND 40 LBS OF DRAW WEIGHT. 30” ARROWS IN . 600 SPINE WORK BEST WITH A RECURVE / LONGBOW BETWEEN 40 AND 50 LBS OF DRAW WEIGHT.
What length should I cut my arrows?
A good rule of thumb is to cut it no shorter than the middle of the riser. At full draw, your arrow end would sit right in the middle of the shelf. The best way to determine how long you want your arrows to be is to nock a full-length, uncut arrow and draw it back.
How long should arrows be for a 30 inch draw?
› content › skills › bowhunting
How long should my arrows be for a 29 inch draw?
it depends on the arrows you choose, you need at least 1/4″ of arrow overhang on the rest. so you can probably shoot an arrow that’s about 28 1/4 for rests that are set up normally. and go all the way up to full length 36″ arrows for indoor. i would suggest 1″ of overhang on your rest.