What size string do I need for my recurve bow?
For a recurve bow your string length should be about 3.5″ shorter than your bow length. Hence, if you are using a 68″ bow, your string length should be about 64.5″.
How do I know what bow string to buy?
When buying a bowstring, you must know your bow length. Measure its length from string groove to string groove. Once you know the bow’s length, you can determine your bowstring’s length. If you shoot a recurve, your bowstring is usually 4 inches shorter than the bow’s length.
What kind of string do you use for a recurve bow?
For recurve bows with a draw weight of up to 40lbs, a 12-strand B50 Dacron string will do. This is also the most common strand size used by everyone from beginners to avid hunters and competitive target shooters. For bows with a draw weight heavier than 40lbs, a 14-strand B50 Dacron will suffice.
How far can a 25 pound recurve bow shoot?
What Can You Do With 25# to 30# Recurve? Contrary to what most people think, a 30 or even a 25 lbs. draw weight is more than enough for recreational target practice. If you have the aim for it and your form is on point, you can successfully hit a target from 60 or even 70 yards away with this kind of draw weight.
What size string do I need for a 60 inch recurve bow?
ATA Specs say that a bow should be properly braced with a string that measures 3″ shorter than the bow. So if a bow is 60″ is should be braced properly with a string measuring 57″ under 100 lbs of tension after 20 seconds.
When should I replace my recurve bow string?
A Recurve bowstring should be replaced every 2-3 years under normal use. The string should be replaced sooner if it becomes frayed, worn, or otherwise damaged. Modern synthetic materials are very durable but stretch and wear out over time.
What arrows should I use for a recurve bow?
Carbon arrows are probably the all around best choice for most recurve bows, whether it be for practice target shooting, competitions and even hunting. Carbon arrows tend to be accurate, durable and are more safe than cheaper alternatives like fiberglass arrows.
How long should a recurve bow string be for 62?
To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string). The actual length of your bowstring (depending on the material) will be 3.5”-5” shorter than its marked AMO length.
Do you twist a recurve bow string?
When re-twisting to achieve correct brace height, be sure to twist in the direction that tightens the center serving. You can determine this immediately on an un-tensioned string simply by grasping each end of the served area between thumb and forefinger, and twisting.
How long of a bow string do I need?
The AMO represents the length of the bow from tip to tip, and the generally accepted rule among archers is the correct bowstring length on a longbow is 3″ less than the AMO, and on a recurve it is 4″ less the AMO.
How many shots is a bow string good for?
With proper care, a bowstring should last at least 2,000 shots, and even 3,000 shots doesn’t automatically mean a string will be severely worn.
Is there a top and bottom to a recurve bow string?
Most recurve bowstrings have a big loop at the top and a small loop at the bottom. But why is that and why do some bowstrings have two big loops? In this article, I am going to discuss these and more questions in more detail.
What are the fuzzy things on a bow string?
These tiny little silencers will do more than just help silence your bow too. The manufacturer claims they will actually increase your arrow speed as it leaves your bow (estimated 1-3 fps).
What arrows should I use for a recurve bow?
Carbon arrows are probably the all around best choice for most recurve bows, whether it be for practice target shooting, competitions and even hunting. Carbon arrows tend to be accurate, durable and are more safe than cheaper alternatives like fiberglass arrows.
What size string do I need for a 62 inch bow?
To achieve the correct brace height you will need to use a bowstring of the same AMO length. (Example: An AMO 62” bow requires an AMO 62” string). The actual length of your bowstring (depending on the material) will be 3.5”-5” shorter than its marked AMO length.
Should you Unstring a recurve bow when not in use?
If you plan on not shooting your recurve bow for an extended period you should definitely unstring it. This will help protect the structure of the bow and prevent loss of power and draw weight.
Can I use candle wax on my bow string?
Can you use candle wax on a bowstring? Using candle wax on a bowstring is generally a bad idea. This is especially true for modern strings on compound bows, as paraffin wax can degrade the synthetic fibers.