How do you line up an arrow rest?
Horizontal rest position: When setting up for a release aid, position your rest so that the arrow is right in line with the forward movement of the string. If you release with fingers, your arrow should be pointed slightly to the left of this line (for right-handed shooters).
How far should arrow rest be from riser?
Place an arrow on the string and move the rest until the arrow is going directly through the burger hole. Now measure from the inside of the riser shelf and move the rest in or out until you reach 13/16” to 7/8” this will give you a good starting point before shooting it through paper.
Should a recurve bow have an arrow rest?
Do recurve bows need an arrow rest? A recurve bow does not need an arrow rest as it’s perfectly acceptable to shoot off the shelf. However, even if shooting off the shelf it’s recommended to use a “shelf rest” which protects the wood on your bow. There are however some advantages to using other types of rests.
What does a recurve plunger do?
The plunger, which is also called a “cushion button,” serves two purposes: It guides the arrow down the bow’s centerline during the shot, and moderates (within reason) the arrow’s flexing upon release. Plungers consist of a tube that encases a spring, which has a plastic “head” that sticks out of the tube.
How far should arrow extend past riser?
As a general rule it’s supposed to be 1″ past the rest, not the riser unless you shoot off the shelf.
Where should my arrow rest be?
Finger shooters should start 3â „8-inch above center. Now, adjust the rest vertically until the center of the arrow shaft crosses the very center of the cushion plunger hole. You can do this by simply holding the bow up so the rest is at eye level.
How do you increase brace height on a recurve bow?
To adjust brace height, unstring the bow, remove the bottom string loop, and then twist or untwist the string. If your brace height is too low, give the bowstring two twists to increase the brace height by about ¼ inch. If your brace height is too high, unwind a few twists from the bowstring.
How does brace height affect a recurve bow?
The brace height of your bow will dictate some of its behaviors, such as how loud it shoots and how much pivoting your arrow will experience mid-air. On most recurves you’ll be able to adjust the brace height by up to 1/2″ in both directions (either increase it or decrease it).
Are drop away arrow rests better?
Additionally, some rests can be easily moved when bumped, diminishing accuracy. A drop away rest is going to be the most consistently accurate rest. Examples of these rests are the QAD Ultrarest HDX, RipCord Ace and Hamskea Hybrid Hunter Pro and several others.
Where do you stick arrow rest?
Arrow Rests are affixed to the side of the recurve bow shaft and are used to keep the arrows in place for precise shooting.